Can be used:
Indoors, OUTDOORS, for RESTORATIONS & new construct
Top quality Ecological & user friendly
AD Applications nv
Nonnenstraat 36
2560 Nijlen
Belgium | BTW: BE 0826.667.553
E-mail:


Webdesign by IDcreation 2010
Unilit b fluid 01234 injection
Catalog > Unilit > UNILIT B FLUID 01234 INJECTION >

UNILIT B-FLUID 0, 1, 2, 3 and 4 are ready mixed mortars based on an inorganic binder of natural hydraulic lime, and a filler.  Pozzolanas can be added to it, if necessary or desired, to adjust the degree of hydraulicity of the product. 

UNILIT B-FLUID 0, 1, 2, 3 and 4 are characterized by a low content of soluble salts, a low modulus of elasticity and high vapour permeability.  The mortars are perfectly stable and delicately prepared so as to limit problems of microfissures and premature drying out.

These three types of mortars with different granular sizes, are specially destined for application (by injection or pouring)  on walls consisting of different components.  For example : the core of a wall consisting primarily of earth, clay, stone and other materials, will after severe water degradation, be washed out to a degree where only the outer walls remain as masonry. 

The injection of UNILIT B-FLUID 4 will provide linkage between the two faēades to restabilise the structure.

UNILIT B-FLUID 2 is a finer stabilising material used where cracking is evident due to movement of shear. After drilling a hole with a diameter of 40 to 50 mm and inserting a 20 mm diameter  rustproof metal or glassfiber tube, the B-FLUID 2 can be poured in, which will result in the stabilisation of the wall. UNILIT B-FLUID 0 will be injected as a final grouting, to fill up the remaining small cavities.  

The mortars UNILIT B-FLUID 0, 1, 2, 3 and 4 will store a large quantity of salts which may come from the substrate and migrate because of humidity.  B-FLUID 0, 2 and 4 have this capacity due to the great natural porosity and low soluble salt content of their binder.  This guarantees the performance and extended life of the mortar.


UNILIT B-Fluid 0-1-2-3 injection grout tech sheet.pdf


Back Contact us